Spoondrink auf Instagram

Jetzt folgen und keine fantastischen Fotos mehr verpassen!

Image Alt

Spoondrink Österreich

How to Make Your Own Dog Mask – The Fundamentals

In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and tricks which you can use.

For those who have a dog that likes to bark, and especially if your dog loves to play in the backyard and other areas of the house, you need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup which will look a little scary at first, but it is actually quite simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape out of the cardboard, so you’ll need to cut around the edge of the mask so you get something that looks like a cone. The main thing here is dog filter mask to be realistic with what kind of paper plate which you’re using.

Then you’ll have to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so that you can ensure that nothing will leak once you put the mask on. Be sure the edges are cut so the edges are not sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask first, so you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.

Don’t worry too much about the paint getting stuck to your mask. It’s easy to remove it later, and it’ll leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wash away any excess paint once you are done, so that you don’t end up with smudges or smears on your dog.

Then it’s time to paste the mask onto your dog’s head. First you need to be certain that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you may begin to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and then fold it over. Be sure that it’s quite strong and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you have the mask snugged firmly onto the surface of your dog. Don’t make the folds too large or else it might look messy. As soon as you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask onto the dog. Make certain that the ears are level and be certain it’s not too short or long as this can cause some problems with the mask slipping off the dog’s face.

If you are using a dog mask because your dog protection, you’ll need to do some sanding to make sure that it’s secure on your dog. You can do it by sanding off any excess paper which might have been removed from your mask.

Post a Comment